Send Inquiry
If you have any questions about our products or services, feel free to reach out to customer service team.
Solar Greenhouse Irrigation
Solar Greenhouse Irrigation
To realize solar greenhouse irrigation with Harvest solar irrigation system, you can follow the steps below:
1. Greenhouse selection and design: Choose a suitable greenhouse for planting and design accordingly. Make sure the greenhouse has good light transmission and air tightness to maximize the use of solar energy.
2. Install the solar panel: choose a suitable location to install the solar panel to ensure that it can fully receive sunlight. It is best to install the solar panels on the roof of the greenhouse or the surrounding area, and the angle should be suitable for the local latitude to obtain the maximum solar energy conversion efficiency.
3. Connect the battery pack and controller: use cables to connect the solar panel to the battery pack to store the electricity generated during the day. The battery pack is then connected to a controller that monitors the charge of the battery pack and controls the operation of the irrigation system.
4. Install water pumps and irrigation equipment: Install solar water pumps in the greenhouse or near a water source near the greenhouse, such as a well, river or pond. Make sure the water pump is able to pump and deliver water efficiently and is connected to irrigation equipment (such as sprinklers, drip irrigators, etc.).
5. Set the controller and sensor: according to the actual needs, set the parameters of the controller and the irrigation plan. You can set the daily irrigation time, water flow, etc. In addition, soil moisture sensors or other environmental sensors are installed to monitor environmental parameters such as soil moisture and temperature in the greenhouse, so as to realize intelligent automatic irrigation control.
6. Run and monitor the system: After confirming that the system is set up and connected correctly, start the solar irrigation system. The system will irrigate automatically according to preset parameters and data collected by sensors. Regularly monitor the soil moisture and plant growth in the greenhouse, and adjust the parameters of the controller as needed to achieve the best irrigation effect.
7. Maintenance and maintenance: Regularly check the cleanliness of the solar panel to ensure that its surface is clean and there is no dust or debris affecting the light absorption effect. Also, check your water pumps and irrigation equipment regularly to make sure they are working properly and make necessary maintenance and repairs.
By following the steps above to use the Harvest solar irrigation system, solar greenhouse irrigation can be achieved. The system converts solar energy into electricity, and introduces water into the greenhouse through solar water pumps, and realizes automatic irrigation control based on preset parameters and environmental sensor data. This method can improve the growth efficiency of plants in the greenhouse, save energy, reduce the dependence on manpower, and realize the automation and sustainable development of solar greenhouse agriculture.
Solar Greenhouse Irrigation Solution Kits
